Thiết bị đo lưu lượng loại ống Venturi tube from bar stock or welded sheet

Applications of the Venturi tube

  • Power generation
  • Oil production and refining
  • Water treatment and distribution
  • Gas processing and transmission
  • Chemical and petrochemical industry
Thêm vào giỏ hàng
Liên hệ mua hàng
Mô tả sản phẩm
Đặc tính thiết kế
Tải tài liệu
Đánh giá

Mô tả sản phẩm

Description of the Venturi tube

A Venturi tube is a reliable and easily-managed and maintained instrument that can measure a wide range of clean liquids and gases.

The main advantage of a Venturi tube over other differential pressure flow measuring instruments is the higher pressure recovery and the lower upstream and downstream straight pipe length requirements.

The Venturi tube consists of a gradually decreasing nozzle, through which the fluid in a pipe is accelerated, followed by a gradually increasing diffuser section. The diffuser section allows the fluid to nearly regain its original pressure.

Due to the fact that a major part of the output pressure is regained, the Venturi tube is particularly suited for the measurement of flow rates in systems with a low pressure differential. Thanks to the low pressure loss the cost of pumping the fluid can be reduced to a minimum.

Đặc tính thiết kế

Special Features of the Venturi tube

  • Suitable for liquid, gas and steam flow measurement
  • Accuracy ≤ ±0.5 % of actual flow rate
  • Repeatability of measurement 0.1 %
  • Ensure the lowest pressure loss in the family of primary flow elements
  • Calibration may be performed if required
 
Hotline Message Gmail Zalo
top
Thông báo
Đóng